Table of Contents
Advertisement
Quick Links
135756115 Gun FStart G HVLP-15-Mva
135756118 Gun FStart G HVLP-18-Mva
135756122 Gun FStart G HVLP-22-Mva
Translation from the original manual - Index A
FSTART Gravity
135756215 Gun FStart G CONV-15-Lva
135756218 Gun FStart G CONV-18-Lva
135756222 Gun FStart G CONV-22-Lva
II 2G Ex h IIB T6 X Gb
582119110
SAMES KREMLIN SAS
13 Chemin de Malacher
38240 Meylan
Tal: 33 (0)4 76 41 60 60
www.sames-kremlin.com
Advertisement
Table of Contents
Related Manuals for SAMES KREMLIN FSTART Gravity
Summary of Contents for SAMES KREMLIN FSTART Gravity
- Page 1 FSTART Gravity 135756115 Gun FStart G HVLP-15-Mva 135756215 Gun FStart G CONV-15-Lva 135756118 Gun FStart G HVLP-18-Mva 135756218 Gun FStart G CONV-18-Lva 135756122 Gun FStart G HVLP-22-Mva 135756222 Gun FStart G CONV-22-Lva II 2G Ex h IIB T6 X Gb...
-
Page 2: Table Of Contents
16.1 Visual diagram ......................19 16.2 Parts list and maintenance kit FStart Gravity (SPARE PARTS) ......... 20 Dimensions FSTART Gravity (Dimensions in MM) ..............21 Warranty ........................... 22 Any communication or reproduction of this document, in any form whatsoever, and any exploitation or communications of its contents are prohibited, except with the express written permission of SAMES KREMLIN. -
Page 3: Safety
• With regard to the fluids and paints used with its equipment, SAMES KREMLIN cannot be held responsible for direct or indirect material damage caused in use, for the poor compatibility of the materials in contact, for the inherent risks to personnel and the environment, for wear and tear, for malfunctions of the equipment or installations and for the quality of the finished product. - Page 4 • It is imperative that the spray booths are properly ventilated to prevent any high concentration of fluid or paint and maintain it lower Ventilation than the LEL (Lower Explosion Limit). • If ventilation is shut off, toxic substances or contamination may remain in the spray booth and cause a risk of fire, poisoning or irritation.
- Page 5 • In order to prevent the accumulation of electrostatic charges which could generate an electric arc in a flammable or explosive environment, necessary that conductive components of the system are grounded. • The gun must be 'grounded' via the fluid hose or the air hose. •...
- Page 6 • Parts and accessories must only be supplied or approved by SAMES KREMLIN. Equipment • SAMES KREMLIN cannot be held responsible for personal injury as modification well as breakdowns and/or damage resulting from modifications to the equipment. • Any modification of equipment made by the user and not...
-
Page 7: Declaration
• Environmental risks must be controlled as follows: Respect an average temperature of use of the equipment and products, which must be at least 5°C (41˚F), lower than the flash point of the products and within a range of 0 to 40°C (32˚ to 104˚... -
Page 8: Identification Of The Product
Identification of the product Description of FSTART Gravity Guns recommended to spray varnishes, lacquers, shades, polyurethanes. Description of the ATEX marking • Each device is marked with the name of the manufacturer, the reference of the device and important information for the use of the device (air pressure, electrical power, etc.). -
Page 9: Technical Data
Weight without cup 410 g 408 g Noise level 84 dBA 80 dBA Maximum ambient operating temperature 50°C / 122°F Materials FSTART Gravity Gun body Chrome die-cast aluminium Head clear anodised aluminium Nozzle INOX (stainless steel) Needle INOX (stainless steel) -
Page 10: Nozzle Characterization Principle
(Z2) : spraybooth 39.37" distance indicated in diagram is given for information/reference purposes only and implies no commitment by SAMES KREMLIN. The user is responsible for the ventilation and conditioning of the painting area where the equipment is used, under working conditions. -
Page 11: Installation Diagram - Air Pressure Adjustment With Or Without Gauge At Gun Handle
(3) must be conductive. One of the 2 gun hoses (air or fluid) must be conductive. Installation Diagram - Air pressure adjustment with or without gauge at gun handle 3 - P 1: Pressure 4 – Guns, model measured at FSTART Gravity gun grip in the course of operation (air needle open) -
Page 12: Start-Up
Start-up • Assemble the head on the gun by positioning it according to the desired spray orientation. • Open at the maximum the air needle. • Open the fluid needle as far as it will go without a stop. • Connect the air hose. -
Page 13: Gun Handling
10 Gun handling When assembling the aircap on the gun, hold it vertically in order to correctly align the aircap before screwing the aircap ring. Keep the gun perpendicular to the surface to be painted. Avoid working with the wrist. Proper position •... -
Page 14: Maintenance
11 Maintenance 11.1 Preventive maintenance Daily • Check groundings. • Clean the outside of the spray nozzle with a soft brush and solvent. • Flush the spray gun. • When the spraying system will not be used for an extended period of time, take off the nozzle and immerse it in a solvent-filled container. -
Page 15: Assembly Errors
13 Assembly errors The use of improper replacement or defective parts may result in hazards to personnel, damage, malfunction or general shutdown of the equipment. 14 Troubleshooting Slightly unscrew the aircap retaining ring and rotate the aircap by one half turn. If the defect is reversed, one of the Distorted lateral air holes is plugged up or deformed. - Page 16 Trouble Cause Solution • • • No fluid out of the gun. Clogged nozzle Cut the pressure on the pump. Depressurize the hoses. • Remove and clean the nozzle with solvent by means of the brush. • Check the seal condition. •...
-
Page 17: Commercial References Fstart Gravity
15 Commercial references FStart Gravity Principle of designation FStart HVLP G=Gravity HVLP (High volume, Low pressure) CONV (Conventional) Nozzle size: • 15 : 1.5 mm • 18 : 1.8 mm • 22 : 2.2 mm Maximum fan width at 20 cm... -
Page 18: Available Projectors - References P/Ns
15.1 Available Projectors – references P/Ns 132756110 Aircap FStart G HVLP-15 22-Mva 131756115 Nozzle + Needle FStart HVLP-15 131756118 Nozzle + Needle FStart HVLP-18 131756122 Nozzle + Needle FStart HVLP-22 FStart G 132756210 Aircap FStart G CONV-15 18-Lva projectors 131756215 Nozzle + Needle FStart CONV-15 131756218 Nozzle + Needle FStart CONV-18... -
Page 19: Maintenance Kit Fstart Gravity 129756901
16 Maintenance Kit FStart Gravity 129756901 16.1 Visual diagram Maintenance kit FSTART gravity 129756901 consisting of Needle packing 129.756.903 Trigger set + Air adjusters 129.756.906 Rear line assembly 129.756.904... -
Page 20: Parts List And Maintenance Kit Fstart Gravity (Spare Parts)
16.2 Parts list and maintenance kit FStart Gravity (SPARE PARTS) Included in Maintenance Designation Quantity Positions 129756901 Needle packing 129.756.903 Packing gasket Needle packing Needle packing screw E-ring Trigger stud 129.756.906 Trigger Trigger set + Air adjusters Air adjustment valve set... -
Page 21: Dimensions Fstart Gravity (Dimensions In Mm)
17 Dimensions FSTART Gravity (Dimensions in MM) -
Page 22: Warranty
"defective" item. The warranty given by SAMES KREMLIN is limited to the replacement of the item in its entirety or the partial replacement of the defective component. SAMES KREMLIN only bears the cost of the parts needed to replace the defective Material. - Page 23 SAMES KREMLIN, nonché le normative nazionali e/o reparar el equipo con arreglo a las recomendaciones reparação do equipamento de acordo com as locali, de SAMES KREMLIN y a la normativa nacional y/o preconizações de SAMES KREMLIN, bem como com • local, outros regulamentos nacionais e/ou locais aplicáveis,...
- Page 24 EU-MEGFELELŐSÉGI NYILATKOZAT DECLARAŢIA DE CONFORMITATE UE Le fabricant / The manufacturer / Der Hersteller SAMES KREMLIN SAS / El fabricante / Il produttore / O fabricante 13, chemin de Malacher / De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce 38 240 - MEYLAN - FRANCE / Proizvajalec / Výrobca / Gyártó...
- Page 25 Utformat i Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan, pe data de 15/05/2019 - 05/15/2019 SAMES KREMLIN - 3 -...