Power Cord Daisy Chain - ADJ IKON PROFILE WW User Manual

Ikon Profile WW
The UC IR (sold separately) infrared remote gives you control of various functions. To control the
fixture you must aim the remote at the front of the fixture. Maximum range is 30 feet.
The Airstream IR (sold separately) remote transmitter plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture, download the free Airstream IR app from the app store.
After downloading the app, plug the IR transmitter into the headphone jack of your iOS phone or
tablet. Raise the volume to the maximum level on your iOS phone or tablet and aim the transmitter at
the fixture sensor. Maximum range is 15 feet. The app comes with 3 pages of control depending on
the fixture you are using. Please see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - This button is invalid for this fixture.
STROBE - Press and hold this button to activate strobing.
FADE/GOBO - This button is invalid for this fixture.
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the out-put intensity.
1-9 - These buttons are invalid for this fixture.
SOUND ON & OFF - These button's are invalid for this fixture.
SHOW - This button is invalid for this fixture.
Ikon Profile WW
With this feature you can connect the fixtures to one another using the IEC input and output
sockets.
The maximum number of fixtures that can be connected in this manner is as follows:
• 16 fixtures maximum @ 120V
• 27 fixtures maximum @ 230V
Once this number of fixtures has been reached, a new power outlet will need to be used in
order to accommodate additional fixtures.
All fixtures connected in this manner must be of the same make and model type. DO NOT mix
fixtures.
ADJ Products, LLC - www.adj.com - Ikon Profile WW User Manual Page 12
ADJ UC IR Control

Power Cord Daisy Chain