Table of Contents
Advertisement
ZPZ IP
With this feature, you can connect the fixtures to one another using a IP-rated connector cable
(sold separately). The quantity that can be connected is 15 fixtures maximum. After 15 fixtures
you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures.
ZPZ IP
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is "hot"; on
some other DMX devices pin 2 may be 'hot'). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
ZPZ IP
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue, dust, dew).
ADJ Products, LLC - www.adj.com - 7ZP IP - User Manual
Power Cord Daisy Chain
Troubleshooting
Cleaning
Page 27
Advertisement
Table of Contents
