Key Operations
Keys
Explanations
• The key lights during measurement.
• Press the key once during standby to start measurement.
• Press the key during measurement to input an event mark.
When the power is on:
You can initialize the settings by turning the power on while pressing
and
.
See "13.3 Initializing Settings (System Reset)" in the Instruction Manual.
• Press the key twice in succession during measurement to stop mea-
surement.
When the power is on:
You can initialize the settings by turning the power on while pressing
.
See "13.3 Initializing Settings (System Reset)" in the Instruction Manual.
• Switches the display content.
• The key flashes while an error message or warning message is dis-
played. Press the key once to clear the display.
• If the key is pressed for at least one second and then released while
measurement values are displayed during measurement, the display
channels are fixed to those displayed the instant the key was released.
Press the key for at least one second again to cancel fixing of the dis-
play channels.
When the power is on:
The instrument enters setting mode if you turn on the power while press-
ing
.
See "Chapter 10 Setting Method for Logger" in the Instruction Manual.
Names and Functions of Parts
5
Need help?
Do you have a question about the Hioki and is the answer not in the manual?