Status Indicator - Xtralis VESDA Sensepoint XCL Installation Manual

VESDA
3.2

Status Indicator

There is a status indicator on the face of the gas detector. The operating state of the detector is indicated by
one of four colors, either steady or flashing.
Normal
Warning
Fault
Inhibited
Alarm
Out-of-range
alarm
Bluetooth pairing The indicator flashes blue when Bluetooth pairing
Bluetooth
connected:
35563_02
VESDA Sensepoint XCL – Large Bore Installation Manual
The indicator is on steady green when the
concentration of the target gas is within normal range.
Note: Using the Sensepoint App, you can change
how the green indicator behaves during
normal operation. Select between steady
green (default setting), confidence flash
every 20 seconds or off.
The indicator alternatively flashes green and yellow
when the gas detector is in a warning state.
The indicator flashes yellow when the gas detector is
in a fault state.
The indicator is on steady yellow when the user has
placed the detector into the inhibit state for
maintenance or repair.
The indicator flashes red when the gas concentration
is beyond the alarm-level threshold.
The indicator rapidly flashes red when the gas
concentration is beyond the full scale deflection of the
detector.
between the gas detector and a smart device is in
progress.
The indicator is on steady blue when a Bluetooth
connection is established with the smart device and
the detector is in a normal condition.
21