Xtralis VESDA Sensepoint XCL Installation Manual page 26

VESDA Sensepoint XCL – Large Bore Installation Manual
6. Remove power and refit the detector module to the back box.
7. Apply power. The VESDA Sensepoint XCL will enter a warm-up mode during which time the status
indicator will be steady yellow and the output (mA version) will be held in an inhibited state.
8. After the warm-up has been completed, the VESDA Sensepoint XCL will enter it's normal operating
state.
20
VESDA
www.xtralis.com