Maintenance - SINTERIT SANDBLASTER User Manual

5. Stick the PE sheeting onto the inner surface of the glass. By default, the sheeting is
already​ ​ a ffixed​ ​ i n​ ​ t he​ ​ s andblaster.
6. Pour ​ t he box of the abrasive material provided into the sandblaster. When
replacing/replenishing the abrasive material, pour no more than 4.53kg. Too much
abrasive material will cause ineffective operation. When pouring the abrasive material
into​ ​ t he​ ​ s andblaster,​ ​ w ear​ ​ s afety​ ​ g oggles.
7. Carefully​ ​ c lose​ ​ t he​ ​ s andblaster​ ​ c over.
8. Put your hands into the protective gloves, place the object to be cleaned below the
nozzle
and​ ​ b egin​ ​ c leaning​ ​ b y​ ​ p ressing​ ​ t he​ ​ f oot​ ​ c ontrol.
9. Perform sandblasting with a continuous stream of air, moving the object in circular
motion.
10. In order to empty the sandblaster, remove the plastic plug from the bottom of the
device.
5.​ ​ M aintenance:
Before​ ​ p erforming​ ​ m aintenance​ ​ o f​ ​ t he​ ​ d evice,​ ​ d isconnect​ ​ t he​ ​ p ower​ ​ a nd​ ​ t he​ ​ a ir.
Clean the cover and parts of the sandblaster with soft cloth. Do not use solvents for
cleaning.
Avoid​ ​ a llowing​ ​ m oisture​ ​ i nto​ ​ t he​ ​ a brasive​ ​ m aterial,​ ​ a s​ ​ i t​ ​ m ay​ ​ c ause​ ​ c logging​ ​ o f​ ​ t he​ ​ n ozzle.
Attempt​ ​ t o​ ​ r emove​ ​ s uch​ ​ c logging​ ​ w ith​ ​ a ​ ​ d rill.
6.​ ​ S afety​ ​ I nformation:
The sandblaster may create a powerful stream of abrasive particles. In order to avoid bodily
injury and/or property damage, carefully read the instruction manual before assembling,
operating​ ​ o r​ ​ p erforming​ ​ m aintenance​ ​ o f​ ​ t he​ ​ s andblaster.
​ ​ CAUTION​ ​ !
1. During operation, do not expose your skin or hands directly to the line of operation of
the​ ​ s andblaster​ ​ n ozzle.
2. Check​ ​ t hat​ ​ a ll​ ​ c omponents​ ​ o f​ ​ t he​ ​ s andblaster​ ​ a re​ ​ p roperly​ ​ s ealed.
3. Do​ ​ n ot​ ​ e xceed​ ​ t he​ ​ m aximum​ ​ o perating​ ​ p ressure​ ​ o f​ ​ t he​ ​ s andblaster.
4. Before replacing the accessories or beginning the assembly, repair, transport, or any
form​ ​ o f​ ​ m aintenance,​ ​ d isconnect​ ​ t he​ ​ s andblaster​ ​ f rom​ ​ t he​ ​ a ir​ ​ c ontainer.
5. Check the quality of all hoses and pneumatic conduits before each use. Check that
all​ ​ c onnections​ ​ a re​ ​ s ecured.
6. Do​ ​ n ot​ ​ d irect​ ​ t he​ ​ n ozzle​ ​ a t​ ​ p eople​ ​ o r​ ​ o bjects.
6