Related Manuals for SINTERIT SANDBLASTER
Summary of Contents for SINTERIT SANDBLASTER
- Page 1 Sinterit SANDBLASTER USER GUIDE Read the instruction manual before using the device Version 1/2020...
-
Page 2: Table Of Contents
12. Terms of warranty ................................11 The SANDBLASTER is designed for cleaning, polishing and finishing of printouts, using dry abrasive material only. Sinterit SANDBLASTER does not include an air compressor. The requirements for the compressor are at the bottom of page number 6. -
Page 3: Safety Information
2. Safety Information The Sinterit SANDBLASTER may create a powerful stream of abrasive particles. In order to avoid injuries and/or property damage, carefully read the instruction manual before assembling, operating or performing maintenance of the SANDBLASTER. WARNING! • During operation, do not expose your skin or hands directly to the line of operation of the SANDBLASTER nozzle. -
Page 4: Contents Of The Sinterit Sandblaster Pack
A. Power supply / B. Nozzle lock nut with ceramic nozzle / C. Replaceable ceramic nozzle (3 pcs.) / D. Replaceable PE foil for SANDBLASTER viewing window (3 pcs.) / E. Adjustable mounting feet (4 pcs.) / F. Pneumatic nipple / G. Air blow gun / H. -
Page 5: Sinterit Sandblaster
Image 2. View of the SANDBLASTER’s front and left side. 1. Pressure gauge / 2. Protective Rubber Gloves / 3. Air filter / 4. LED light / 5.Nozzle / 6. SANDBLASTER lid / 7. Power socket / 8. Power switch / 9. Pneumatic pressure regulator / 10. Lid’s lock / 11. SANDBLASTER chamber Image 3. -
Page 6: Specification
Size of package 500 x 500 x 500 [mm] (19.7 x 19.7 x 19.7 [in]) Package weight 20 [kg] (44 [lbs]) Package contents Sandblaster + 4 [kg] (8.8 [lbs]) of Abrasive material + Manual + Accesories POWER Power supply 230 [V] / 50 [Hz] or 110 [V] / 60 [Hz] Average power consumption 6 [W] Max. -
Page 7: Initial Startup Of The Sinterit Sandblaster After Delivery
5. Initial startup of the Sinterit SANDBLASTER after delivery Remove all the solid protective packaging. Gently pull out the SANDBLASTER and accessories. BLUE Remove the bubble wrap and place the machine on a stable surface. Screw the Adjustable mounting feet (4 pieces) to the SANDBLASTER’s base and place the machine at... -
Page 8: Sandblasting Of Printouts
10. All remaining powder and abrasive material can be blown out from the printout with the Air blow gun 11. When the work is finished, turn off the pressure to 0 [MPa] (0 [Psi]) and switch off the SANDBLASTER. 7. Maintenance of the Sinterit SANDBLASTER •... -
Page 9: Replacement Of The Abrasive Material
B. REPLACEMENT OF THE ABRASIVE MATERIAL • Disconnect the SANDBLASTER from the Power supply and the compressor • Tilt the SANDBLASTER to the back and pull out the plastic cork from the bottom. • Gently transfer whole contents SANDBLASTER into the sealed container. Treat it as industrial waste. -
Page 10: General Legal Information
(consumables) other than those provided to the purchaser by Sinterit. Sinterit is not liable to the purchaser of the product or any third party for any damages, including but not limited to losses or lost profits resulting from improper use of the product, particularly not in accordance with this manual, or modifications or repairs unauthorised by Sinterit or improper maintenance. -
Page 11: Terms Of Warranty
The terms of the warranty are set forth in the agreement between the buyer and the Company. In case of a purchase made in the Sinterit online shop, the terms of the guarantee are specified in the Terms and Conditions, subject to the acceptance of the Customer before placing an order. - Page 12 SINTERIT Sp.z o.o. ul. Kalwaryjska 69/9 30-504 Krakow, Poland www.sinterit.com Contact: +48 570 967 854...
Need help?
Do you have a question about the SANDBLASTER and is the answer not in the manual?
Questions and answers