OBH Nordica Legacy 7749 Instructions Of Use page 33

blade is extremely sharp! Do not touch the blade
during use. Be careful that neither fingers nor
tools touch the blade! Always unplug before
cleaning.
12. The blender must not be used for more than
3 minutes at a time. Then leave the blender to
rest for 1 minute before restarting it (to avoid
overheating).
13. Always check the appliance, the cord and the
switch before use. If the cord is damaged, it must
be replaced by the manufacturer, an authorized
service agent or a similarly qualified person in
order to avoid a hazard.
14. Extra protection can be obtained by installation of
a residual current device of 30 mA. Check with
your installer.
15. The appliance is for domestic use only.
16. If the appliance is used for other purposes than
intended, or is not handled in accordance with
the instruction manual, the full responsibility for
any consequences will rest with the user. Any
damages as a consequence of the above to the
product are not covered by the warranty.
Before use
Wash the jug, lid and filler cap in hot soapy water. The blade at the base of the
jug is very sharp and must be handled with the utmost care. The blade unit can
be removed and washed separately. For more information, see "Cleaning and
maintenance".
Use a damp cloth to clean the motor section.
Main components (see image on page 3)
1. Lid
2. Glass jug
3. Motor section
4. START/STOP button
5. Pulse button
6. Function dial
7749_JG_1017.indd 33
33
2018-08-24 11:35:27