OBH Nordica Legacy 7749 Instructions Of Use page 35

Smoothies
Pulse
Continuous speed MIN-MAX The blender has continuous speed adjustment.
Once a programme has ended, turn the blender off and turn the function dial
back to 0.
It is recommended that you try various speeds to work out what is best for the
ingredients you are mixing. Always keep an eye on the mixing process and
switch the appliance off once the required results have been reached. Always
unplug the appliance after use.
The blender must not be used for more than 3 minutes at a time. Then leave
the blender to rest for 1 minute before restarting it (to avoid overheating).
Never remove the glass jug from the appliance when the motor is running.
NOTE! Please note that the blender must not be started up with only dry
ingredients inside (e.g. nuts), as this may break the appliance. Always add a
splash of liquid before starting the blender.
Mixing hot liquids
The glass jug can tolerate hot ingredients and liquids/soups. When hot liquids
are added to a closed container (e.g. a blender jug with lid), high pressure
forms automatically. There is a risk, therefore, that the lid will fly off during use
and hot liquid will spray out. To avoid this, do the following:
1. The temperature of the liquid to be added should not exceed 65°C.
2. Fill the jug no more than half full with the desired ingredients (such as
vegetables, root vegetables, etc.)
3. Start the blender on the Fruit/vegetable programme and then slowly pour
the liquid (hot stock, cream, or similar) through the hole in the lid. Do not
7749_JG_1017.indd 35
The blender operates at various alternating
speeds for around 1 minute unless it is turned
off manually at the switch or by turning the
function dial to 0.
Use pulse mode (P) for short time intervals and
for crushing ice. The pulse button must be kept
depressed for the blender to operate. As soon as
the button is released, the blender switches off.
Start at a low speed and gradually increase as
required. Turn the function dial to the desired
speed and start the mixing process using the
START/STOP button. Switch the blender off by
turning the function dial back to 0 or pressing
the START/STOP button.
35
2018-08-24 11:35:27