Hunter SRC Plus Product Information Manual page 6

PRODUCT FEATURES
AND BENEFITS
Procedure to operate the Rapid
Manual Advance Feature for a quick
system check
1. Press the button for 2 seconds.
2. Station run time will flash in the
display. This feature automatically
defaults to program A. You can select
program B or C by immediately
pressing the button before the
PRG
number stops flashing.
3. After a 2 second pause, the program
will begin. Press the
repeatedly to scroll through the stations
in the program.
4
(continued)
Rain Sensor Bypass...
Simplified override of rain sensor
With the built-in rain sensor bypass, there
is no need for an additional manual bypass
switch when using rain sensors. The SRC
Plus works with most rain and freeze
sensors on the market today. If the sensor
is preventing system operation, just turn
the dial to "Run (Bypass Sensor)" and the
rain sensor will be overridden.
button
Semi-Automatic Operation...
Manual watering of all stations
Turn the dial to "Manual-All Stations"
and choose either a program or a specific
station within that program to start
irrigating. Then turn the dial back to run,
and the SRC runs through the remaining
stations. You may also change the times on
a given program to create a custom manual
program. After the controller completes
the manual watering, it will return to the
original schedule.
STATION RUN TIME
YEAR
PROGRAM
PROGRAM MONTH
DAY
RUNNING
START
START
AM
TIMES
TIMES PM
24 HR.
SUN MON TUES WED THUR FRI SAT EVEN/ODD
RUN
SYSTEM OFF
MANUAL - ALL STATIONS
MANUAL - SINGLE STATION
SET DAYS TO WATER
Plus Plus
NEXT
RUN (BYPASS SENSOR)
SET CURRENT DATE /TIME
SET WATERING START TIMES
SET STATION RUN TIMES