Maintenance, Cleaning; Warranty - Permobil ATI Operation Manual

MAINTENANCE, CLEANING AND DISINFECTING
WARNINGS:
- Cleaning and disinfecting are separate processes. Cleaning must precede
disinfection. Before use by a different individual: clean, disinfect, and
check the product for proper functioning.
- Clean the product regularly and when it becomes soiled.
- Follow all manufacturer germicidal disinfectant safety guidelines.
- Do not continue to use the product if any part is broken, cannot be
adjusted, or is not functioning properly. Periodically, check the product
for damage and wear, and replace if necessary.
CAUTIONS:
- Do not use abrasives such as steel wool or scouring pads on the product.
- Do not use cleaning products containing petroleum or organic solvents
[i.e., acetone, toluene, methyl ethyl ketone (MEK), naptha, dry cleaning
fluids, adhesive removers] on the product.
To clean: Remove from the cover. Hand wash with a sponge,
using soap and water. Rinse with clean water. Wipe dry with a
clean cloth.
To disinfect: Remove from the cover. Wipe gently with a cloth
dampened with a household disinfectant. Rinse with clean
water. Wipe dry with a clean cloth and then allow to air dry
completely.
Recommendation: When washing by hand, use room-temperature water.
Care Symbols
Hand wash.

WARRANTY

This product is covered by a lifetime warranty against manufacturer defects. If a manufacturing defect should
occur, discontinue use immediately; note that the product will be replaced at no cost to the buyer. Wear from
regular use is not considered a manufacturing defect. Replacement parts are available by contacting your
supplier, distributor, or retailer.
The following will void the warranty: modifications made in attempt to interface with other products (where
compatibility is limited, as described in product information); alterations made to the product; or defects
caused by irregular use.
Warranty Replacement Procedure
Warranty claims should be initiated by the original purchaser, who should contact the DME supplier,
distributor or retailer from whom the product was purchased, if they are available, or any authorized Permobil
DME supplier, distributor or retailer.
Whenever possible, the DME supplier, distributor or retailer with a warranty issue should contact Customer
Support and provide the original purchase order number, sales order number, or invoice number. Before a
warranty replacement order or quote may be processed, Customer Support must issue a Return Merchandise
Authorization (RMA).
ATI Operation Manual
Dry flat.
6
Wipe with a damp cloth.