Maintenance; Inspection; Cleaning; Roller Lubricating Or Replacement - Permobil SmartDrive MX2+ User Manual

Maintenance

Inspection

Always inspect the SmartDrive, omni-drive wheel, PushTracker / E3, attachment hardware and SpeedControl dial /
SwitchControl button(s) for missing parts / damage prior to each use . Cease use and contact Customer Support or your
mobility equipment dealer if you notice any of the following:
- Broken or cracked plastic
- Any of the rollers do not spin with little resistance, have flats worn in them or any other significant damage
- Significantly worn down rollers and / or damaged wheel plastic
- Ripping rubber on the PushTracker / E3
- Missing or loose screws
- Adaptive clamp has rotated downward [on rigid wheelchairs]
- Broken or fraying cables
- Magnetic receptacle or plug has collected metal shards
- Any abnormal motor activation / deactivation activity [during use]

Cleaning

Cleaning of the SmartDrive can be done by wiping all of the parts down with a damp wash rag . This should be done at least
once a month, or as needed .

Roller Lubricating or Replacement

The omni-drive wheel contains 16 or 18 rubber rollers that may wear down, depending
on driving conditions, after extensive use . These rollers are able to be replaced . Also,
in snowy climates, salt may cause corrosion to the bearings on these rollers and affect
their performance . Spraying lubrication on these bearings will increase their usable lives
[see graphic to the right] . Contact your mobility equipment dealer or Customer Support
for information on replacing / maintaining the rollers on your SmartDrive .

Other Maintenance

Contact Customer Support or your mobility equipment dealer for any other maintenance or replacement that the device
might need .
Download and connect to the App regularly to ensure your device is running the latest firmware, as features are added and
improvements are made .
EN - SmartDrive MX2+ User's Manual 16