Maintenance And Cleaning - Permobil Total Control Head Array User Manual

5

Maintenance and cleaning

Turn off the power before cleaning. After cleaning and before
operating the Total Control Head Array, make sure that all
metal parts, pads, and covers are completely dry.
For minor spot cleaning, the covers can be cleaned with a damp
cloth and mild detergent. If more thorough cleaning is needed,
follow the washing instructions on the cover.
The metal parts on the head array can be cleaned using a damp
cloth. If more thorough cleaning is needed, use soapy water on
the surface.
Weekly maintenance:
• Clean the pads and covers using a cloth dampened with
soapy water.
Daily maintenance:
• During weather conditions that cause you to sweat, the pads
and covers must be cleaned every day.
• Check whether all sensors and switches are properly adjusted
and in a fixed position, to ensure that all operation modes of
the head array are always accessible to the user.
18 - Maintenance and cleaning