AETEK C50 Series Quick Installation Manual

C50 Series - L2 Gigabit Ethernet PoE Switch Model List

Model Description
C50-082-30-130 8xGbE PoE +2xGbE SFP, 100~240VAC, 130W power budget
C50-182-30-250 16xGbE PoE +2xGbE SFP, 100~240VAC, 250W power budget
C50-242-30-370 24xGbE PoE +2xGbE SFP, 100~240VAC, 370W power budget

PACKAGE CONTENTS

* 1x PoE switch
* 2x rack mount ears
C50-242-30-370
Link/Act/Speed
10/100/1000 RJ45 Ports
Mode LED System LED
Mode LEDs
Mode Reset Button
Led Definitions
System Green ON
Green OFF
Red ON
Link/Act/Speed Green ON
PoE Green ON
RJ45 ports Green ON
SFP ports
Green Blinking
Amber ON
Amber Blinking
PoE Mode Green ON
RJ45 ports
Amber ON

DEFAULTS

IP Address 192.168.1.1
Subnet Mask
255.255.255.0
User name admin
Password admin

C70 Series - L2+ Gigabit Ethernet Switch Model List

Model Description
C70-00A-01 8xGbE + 2xCombo GbE (SFP & RJ45), 100~240VAC
C70-00B-01 2xGbE RJ45 + 12xGbE SFP + 2x1G/10G SFP+, 100~240VAC, 24-48VDC
24xGbE + 2xCombo GbE (SFP & RJ45), 100~240VAC
C70-00E-01
20xGbE SFP + 4xCombo GbE (SFP & RJ45) + 4x1G/10G SFP+, 100~240VAC, 24-72VDC
C70-00F-01
PACKAGE CONTENTS
* 1x L2+ switch
* 2x rack mount ears
C70-00A-01
10/100/1000 RJ45 Ports
System LED
Port Status LEDs
Console Port
Reset Button
C70-00E-01
System LED
Mode LEDs
Mode/Reset Button
C50/C70/H70 Series
* 1x Quick Installation Guide
* 1x power cord (type by the shipped-to area)
C50-182-30-250
100/1000
SFP Ports
Port Status LEDs
Power is on and normal.
The switch is not receiving power.
An abnormal state, such as exceeding operation temperature, has been detected in the switch.
The port Status LEDs displaying link status, network activities, and speed on each port.
The RJ45 port status LEDs display PoE powering statuses on each port.
Port is enabled and link established with a device at the 1000Mbps speed.
Port is transmitting and receiving data at the 1000Mbps speed.
Port is enabled and link established with a device at the 100Mbps speed.
Port is transmitting and receiving data at the 100Mbps speed.
Port is enabled and supplying power to PD.
An abnormal state detected, such as overload.
Mode/Reset Button
Task Press time
Change LED Mode 0 ~ 2 seconds
Restart 2 ~ 7 seconds
Restore defaults 7 ~ 12 seconds Green Blinking
* 1x Quick Installation Guide
* 1x power cord (type by the shipped-to area)
100/1000 RJ45/SFP Combo Ports
100/1000
RJ45/SFP
10/100/1000 RJ45 Ports Combo Ports
Port Status LEDs
Console Port
Quick Installation Guide
* 4x rubber feet
10/100/1000
Link/Act/Speed
RJ45 Ports
Mode LED System LED
Mode LEDs
Mode Reset Button Port Status LEDs
System LED Behavior Port Status LED Behavior
Green ON
Green Blinking
* 4x rubber feet
* 1x RS232 DB9-to-DB9 cable
C70-00B-01
AC 100V to 240V Power Input
DC 24~48V Power Input
System Status LEDs
C70-00F-01
AC 100V to 240V
Power Input
DC 24~72V
Power Input Reset Button
C50-082-30-130
100/1000
Link/Act/Speed
System LED
SFP Ports Mode LED
Mode LEDs
Mode Reset
Button
LED status will be changed according to the mode
selected
All LEDs are OFF
All LEDs stay ON
10/100/1000 RJ45 Ports
1G/10G SFP+Ports
100/1000 SFP Ports
Console Port Port Status LEDs
Reset Button
DC Power LED
100/1000
System
AC Power LED
RJ45/SFP
LED
Combo Ports
100/1000 SFP Ports
Port Status LEDs
Alarm LED
10/100/1000
RJ45 Ports
100/1000
SFP Ports
Port Status
LEDs
Console Port
1G/10G SFP+Ports