Operation Instructions - Sinclair KJR- 90D Installation And User Manual

Remote signal receiving
function
The wired remote controller can be
a remote signal receiving device,
you can use the wireless remote
CAUTION
The wired remote controller will not
controller to control the air-conditioner
receive the swing controlling
instruction. For the indoor unit with
swinging function, you can directly
use the wireless remote controller to
control swinging through the display
panel of the indoor unit or use the swing
through the wired remote controller
button on the wired remote controller
to control the indoor unit for swinging.
On and Off the air-conditioner
Press the On/Off button to control
the indoor unit turn on and turn off status.
when the system have been powered
When the unit is turned off, press the
On/Off button, the unit will be turned
When the unit is turned on, press the
On/Off button, the unit will be turned off operating mode, after each button press the operation mode will circle Press the mode button to set the Set the operating mode AUTO as follow: → setting buttons Fan speed setting Under Auto and Dry modes the fan speed When the controller has been set to cool-only, then there is no HEAT mode. → AUTO lights up HEAT Temperature setting DRY Under AUTO, COOL, DRY, HEAT → COOL → is not adjustable and the default fan Under COOL, HEAT and FAN modes, speed is AUTO. Under COOL, HEAT and FAN modes
and the operating icon
on and the operating icon
on.
4