Maintenance Of The Product; Warnings And Precautions - Prilux BRANCH STRING 192675 User Manual

BRANCH
STRING
CODE CONSUMPTION
192675
192668
192705
192699
192682
192712
60º
IP20
6V
-20º
3m
5cm
BRANCH STRING/ BRANCH STRING MULTICOLORED
WARNING
BEFORE STARING THE INSTALLATION OF THIS PRODUCT
, PLEASE READ ATTENTIVELY THE INSTRUCTIONS AND
KEEP THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE PERFORMED BY QUALI-
FIED PERSONNEL.
THE IMPROPER HANDLING OF THE COMPONENTS
OR THE PRODUCT COULD DAMMAGE THE CORRECT
FUNCTIONING OF THIS DEVICE THUS CANCELLING THE
WARRANTY OF THE PRODUCER
THE WARRANTY OF THE PRODUCER IS CANCELLED IF
THE INSTALLATION IS NOT PERFORMED FOLLOWING
THE INDICATED IN REBT 2002.
THE APPLICATION ITC BT09-4 OF THE REBT IS MANDA-
TORY (INSTALLATION OF OVERVOLTAGE PROTECTORS
OF IN LINES AND RECEIVERS) FOR INDUSTRY INSTALLA-
TIONS AND PUBLIC LIGHTING. THE WARRANTY DOES
NOT COVER DAMMAGES PRODUCED BY OVERVOLTA-
GE ON RECEIVERS WITHOUT OVERVOLTAGE PROTEC-
TORS.
THE APPLICATION OF ITC BT19 ( INTERIOR OR RECEI-
VING INSTALLATIONS.GENERAL PRESCRIPTIONS) IS
MANDATORY.
THE APPLICATION OF ITC BT34 (INSTALLATIONS FOR
SPECIAL PURPOSES. FAIRS AND STANDS) IS MANDA-
TORY.

MAINTENANCE OF THE PRODUCT

ALL PRILUX CHRISTMAS LIGHTING MOTIF, NEED A
MAINTENANCE BEFORE BEING USED, IT MEANS TO
CHECK ALL THE CONNECTIONS (INCLUDED THE END
CAP) IN ORDER TO BE SURE THAT THE MATERIAL HAS
THE PERFECT TIGHTNESS.
LED COLOR
8,64W Cool white
8,64W Warm white
8,64W Pink
8,64W Cool white
8,64W Warm white
8,64W Multicolored
12m
[GRÁFICOS: Unidades en mm/ GRAPHICS: Units in mm/GRAPHIQUES: Unités en mm/GRÁFICOS: Unidades em mm]
CABLE COLOR
Silver
Gold
Silver
Silver 216 Flashing
Copper 216 Flashing
Silver
3m
5cm
BRANCH STRING FLASHING

WARNINGS AND PRECAUTIONS:

• This product is suitable for use at indoors.
• This is a decorative product! It is not a toy, keep out of reach of small
children.
• Do not manipulate the product while it is working.
• Under no circumstance, should you cut, change or reduce it.
• Do not use this product in contact with water directly or with wet hands.
• Make sure that all the connections are well placed and right tight and
sealed.
• Check that all the connections are secured with its corresponding heat
shrink tube
• Protect all the cables against any possible damage.
• The lamps are not exchangable.
• Do not connect this product to another.
• If the product is defective, it must be disposed.
• Throw away properly any defective product.
• Never place or use this product close to heat sources.
• Disconnect the electrical current before installing this product.
• In case of technical questions, ask always to qualified staff.
WARNINGS - BEFORE PUTTING INTO OPERATION
• Before putting it into operation, make sure that the voltage of the grid is
compatible with that one which is indicated in the power supplier.
• Before putting the product into operation, check out that it is not dama-
ged.
ASSEMBLY INSTRUCTIONS: SAFE INSTALLATION
GENERAL
• Do not use any metal tool or material which lead to a cut in the thread.
Those might damage the product, cause short-circuits or a bad performance
of the product.
• Take into account that the useful life of the product depends considera-
bly on the way it is mounted, dismounted and deposited.
• Treat it always carefully and properly.
ASSEMBLY
• For the assembly ( ex. steel cable), use preferably UV-resistant seals or
original accessories
• Mount always this product the most stable and right possible. Do not let
this product hang freely.
• Make sure that the minimum distance of 1.5 cm between cables and
Nº LEDs MEASURE
216 12m
216 12m
216 12m
12m
12m
216 12m
12m