Advertisement
Available languages
Available languages
304
CODE
POWER
163675
25W
163682
25W
163699
25W
163705
25W
995092
977722
10sets
60º
IP44
230V dc
-20º
1m
WARNING
BEFORE STARING THE INSTALLATION OF THIS PRO-
DUCT , PLEASE READ ATTENTIVELY THE INSTRUCTIONS
AND KEEP THEM IN A SAFE PLACE.
THE INSTALLATION SHOULD BE PERFORMED BY QUA-
LIFIED PERSONNEL.
THE IMPROPER HANDLING OF THE COMPONENTS
OR THE PRODUCT COULD DAMMAGE THE CORRECT
FUNCTIONING OF THIS DEVICE THUS CANCELLING
THE WARRANTY OF THE PRODUCER
THE WARRANTY OF THE PRODUCER IS CANCELLED IF
THE INSTALLATION IS NOT PERFORMED FOLLOWING
THE INDICATED IN REBT 2002.
THE APPLICATION ITC BT09-4 OF THE REBT IS MAN-
DATORY (INSTALLATION OF OVERVOLTAGE PRO-
TECTORS OF IN LINES AND RECEIVERS) FOR INDUS-
TRY INSTALLATIONS AND PUBLIC LIGHTING. THE
WARRANTY DOES NOT COVER DAMMAGES PRO-
DUCED BY OVERVOLTAGE ON RECEIVERS WITHOUT
OVERVOLTAGE PROTECTORS.
THE APPLICATION OF ITC BT19 ( INTERIOR OR RECEI-
VING INSTALLATIONS.GENERAL PRESCRIPTIONS) IS
MANDATORY.
THE APPLICATION OF ITC BT34 (INSTALLATIONS FOR
SPECIAL PURPOSES. FAIRS AND STANDS) IS MANDA-
TORY.
MAINTENANCE OF THE PRODUCT
ALL PRILUX CHRISTMAS LIGHTING MOTIF, NEED A
MAINTENANCE BEFORE BEING USED, IT MEANS TO
CHECK ALL THE CONNECTIONS (INCLUDED THE END
CAP) IN ORDER TO BE SURE THAT THE MATERIAL HAS
THE PERFECT TIGHTNESS.
LED COLOR
CABLE COLOR
Cool white
White
Warm white
White
Warm white
Black
Blue
White
ACCESSORIES
Black power cable (NOT included)
White power cable (NOT included)
x4
[GRÁFICOS: Unidades en mm/ GRAPHICS: Units in mm/GRAPHIQUES: Unités en mm/GRÁFICOS: Unidades em mm]
Nº SEGMENT
4
4
4
4
WARNINGS AND PRECAUTIONS:
• This product is suitable for use both indoors and outdoors.
•
This is a decorative product! It is not a toy, keep out of reach of small
children.
• Do not manipulate the product while it is working.
• Under no circumstance, should you cut, change or reduce it.
• Do not use this product in contact with water directly or with wet hands.
• If you use this product outdoors, you should use as power supplier a IPX4
tight base (outdoor use)
• Make sure that all the connections are well placed and right tight and
sealed.
• Check that all the connections are secured with its corresponding heat
shrink tube
• Protect all the cables against any possible damage.
• The lamps are not exchangable.
• Do not connect this product to another unless it has been made by Prilux.
• If the product is defective, it must be disposed.
• Throw away properly any defective product.
• Never place or use this product close to heat sources.
• Disconnect the electrical current before installing this product.
• In case of technical questions, ask always to qualified staff.
WARNINGS - BEFORE PUTTING INTO OPERATION
• Before putting it into operation, make sure that the voltage of the grid is
compatible with that one which is indicated in the power supplier.
• Before putting the product into operation, check out that it is not dama-
ged.
ASSEMBLY INSTRUCTIONS: SAFE INSTALLATION
GENERAL
• Do not use any metal tool or material which lead to a cut in the thread.
Those might damage the product, cause short-circuits or a bad performance
of the product.
• Take into account that the useful life of the product depends considera-
bly on the way it is mounted, dismounted and deposited.
• Treat it always carefully and properly.
ASSEMBLY
• For the assembly ( ex. steel cable), use preferably UV-resistant seals or
original accessories
• Mount always this product the most stable and right possible. Do not let
this product hang freely.
• Make sure that the minimum distance of 1.5 cm between cables and
lamps is not exceeded.
• In operation, lamps and cables must not be touched, crossed or being
rolled or twisted.
ASSEMBLY INSTRUCTIONS: SAFE EXTENSION
• Do not connect between each other more products than those which
are authorised.
• Take into account the fact that the maximum quantity of products
Nº LEDs
Nº LEDs/SEGMENT
304
76
304
76
304
76
304
76
Advertisement
