Operation; Light Intensity; Display Rotation; Installing Probe Accessories - Extech Instruments HDV600 User Manual

Operation

Zoom

Light Intensity

Taking a Picture
Recording a Video

Display Rotation

Installing probe accessories

Find Quality Products Online at:
1. Connect the probe to the monitor.
2. Press the Power button to turn the monitor on.
3. Maneuvere the probe into position to view the area to be examined. The probe can be
bent into the shape of the area to be examined. Optimum focus distance is 2 to 6cm (0.79
4. Optimum focus distance is probe dependent, but the typical range is 2 to 6cm
Press the or zoom buttons to increase or decrease the display resolution from 1X to 2X.
Press and release the or
intensity
Note: the camera LEDs become warm when set to maximum intensity
Press the button to take and store a picture into memory. The
display when a picture is taken.
Press the button to start recording a video. The
when a video is being recorded. Press the
recorded on the video via the microphone on the bottom of the monitor.
Note: The bottom access cover must be removed for audio recording.
The IP67 waterproof rating applies to the monitor when the bottom panel access cover is fully in
place.
Press the button to rotate the display 90 degrees.
Three accessories (mirror, anti-snag tip and magnet) are supplied with each probe.
Attach the accessory by unscrewing the probe ring and screwing on the attachment.
GlobalTestSupply
www.
buttons to increase or decrease the camera LED light
icons will appear on the display
button to stop the recording. Audio will be
5
.com
icon will appear on the
HDV600-en-GB_V3.0 1/18
sales@GlobalTestSupply.com