Adjusting The Telephone; Adjusting The Loudspeaker; Activating/Deactivating The Mute Melody - Siemens Euroset 5020 Quick Manual

A C
... If necessary, press the Down/Up key until the
desired number appears in the display.
To terminate the process:
?
Press the Set key.
Saving during a call
You can also save phone numbers in the same way during a
call (notebook function).
Note:
After the 20th digit, any following digits are moved from right to left
in the display.
Delete all repertory numbers
?1251
Initiate function.
?
Press the Set key.

Adjusting the telephone

Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels and
can also be deactivated completely (default setting: level 4).
◆
To adjust when the telephone is idle:
?5
Initiate function.
H I
... Adjust the volume with the Loud/Quiet key.
?
Press the Set key.
◆
To adjust while the telephone is ringing:
Press H ... I before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one of
three levels (default setting: level 3).
?6
Initiate function.
1 3
... Press one of the keys 1...3:
1: highest frequency; 3: lowest frequency.
? Press the Set key.
Setting the ringtone
Ten different ringtones can be set for the ringer (default
setting: ringtone 9).
◆
To set with the telephone is idle:
?7
Initiate function.
0 9
... Press one of the keys 0 ... 9
?
Press the Set key.
◆ To set while the telephone is ringing:
4
GB
0 9
... Press one of the keys 0 to 9.
Setting the handset volume
The volume on the handset can be set to one of 3 levels and
saved (default setting: level 1).
?9 Initiate function.
H ... I Adjust the volume with the Loud/Quiet key.
?
Press the Set key.
Mute
You can deactivate the telephone's handset and
microphone. Then the other party can no longer hear you.
J
During a call: Press the Mute key
Activate: Press the key again.

Adjusting the loudspeaker

While in handsfree mode, you can set the volume to one of
7 levels and save it (default setting: 1).
H I
... Adjust the volume with the Loud/Quiet key.

Activating/deactivating the mute melody

You can activate and deactivate the mute melody for the
mute (default setting: on).
?19 #
Initiate function.
0 / 1 0: deactivate; 1: activate.
?
Press the Set key.
Baby call (direct call) number setting
If a phone number is set for the Baby Call function, it is
dialled automatically when the telephone is locked
(s. "Activating/deactivating the telephone lock") after you
lift the handset (or press the Loudspeaker key) and press
any key (except ? ,
does not allow other phone numbers to be dialled, but
incoming calls can be received.
?82
Initiate function.
o
Enter direct call number (max. 32 digits).
?
Press the Set key.
When the baby call function is activated, you will see
{
and in the display.
Deactivating
?80
Initiate function.
?
Press the Set key.
L , H and I ). The telephone
è