Table of Contents
Advertisement
Available languages
Available languages
If automatic call pick-up is not activated:
-
Press the Name key if the caller is stored
and the Name key is flashing.
or ...
L
Press the Loudspeaker key to talk hands-
free.
or ...
c
Lift the handset if you want to talk via the
handset.
Returning a call via a Name key
A Name key is lit up if a call from the stored phone
number came in.
--
Press the Name key twice. After 2 seconds
c
the number is dialled.
Lift the handset if you want to talk via the
handset.
or ...
-
Press the Name key once. The light goes
out without the call being returned.
Adjusting the telephone
Changed telephone settings must be completed by
holding down the Set key
ble permanently.
To cancel without saving, e.g. after an incorrect
entry, simply replace the handset if it is off the hook
or pick it up if it is on the hook. The original setting is
then retained.
Activating/deactivating the proximity sensor
The proximity sensor recognises when someone
approaches the telephone and automatically acti-
vates the display and key lighting.
*
Hold down the Proximity sensor key to
Œ
activate/deactivate the function.
The display shows the
sensor is activated.
º
to make them availa-
symbol when the proximity
5
en
Activating/deactivating automatic call pick-up
An incoming call from a number stored under one of
the Name keys is automatically answered via the
handsfree function when someone approaches the
telephone. Prerequisite: the proximity sensor is acti-
vated.
1
Hold down the Automatic call pick-up key
to activate/deactivate the function.
When the automatic call pick-up function is activated,
the symbol for the proximity sensor (
the display.
Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels
and can also be deactivated completely (default set-
ting: level 4). If the ringtone is deactivated, you can
only recognise incoming calls from the display and
the flashing Calls list key.
To adjust when the telephone is idle:
º5
Hold down the Set key. Initiate function.
H
I
...
Adjust the volume with the Loud/Quiet
º
key.
Hold down the Set key.
To adjust while the telephone is ringing:
H
I
Press
...
before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one
of three levels (default setting: level 3).
º6
Hold down the Set key. Initiate function.
1
3
...
Press one of the keys 1...3:
1: lowest frequency;
º
3: highest frequency.
Hold down the Set key.
Œ
) flashes in
Advertisement
Table of Contents
