Download  Print this page

Last Number Redial; Saving Numbers; Saving Repertory Numbers; Adjusting The Telephone - Siemens Euroset 5020 Quick Manual

Hide thumbs

Advertisement

Table of Contents
euroset 5020 / SAR arab-eng-fra / A30350-M209-H301-2-3T19 / 5020.fm / 03.08.2006

Last number redial

The last 5 numbers dialled (up to 32 digits) are saved
automatically. You can retrieve these numbers from the last
number redial list and dial them again:
Redialling the last number dialled
c;
Lift the handset and press the last number
redial key. The last number dialled is redialled
immediately.
Dialling from the last number redial list
;
Without lifting the handset: Press the last
number redial key.
The last number dialled is displayed. (You can
leave the last number redial list at any time by
>
pressing
A
C
...
Using the Down/Up key, scroll through the list
to the desired number.
B
Press OK or
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.
Dialling using the repertory keys
c
Lift handset. (If necessary, press
level repertory key).
:
Press repertory key.
or ...
:
Press repertory key. (If necessary, press
a 2nd level repertory key).
Bc
Press OK or
After 2 seconds the number is dialled.
Lift the handset if you want to talk via the
handset.

Saving numbers

Different telephone settings must be completed with the
?
Set key
so that they are available permanently.
In order to cancel without saving, e. g. after an incorrect
entry, replace the handset instead of pressing
end. The original setting is then retained.
Saving with notebook function
You can also save phone numbers during a conversation
with the notebook function.
.)
L
key.
=
for a 2nd
=
L
key.
?
at the
3
GB

Saving repertory numbers

You can save up to 20 phone numbers (or even functions,
see page 7) on both levels of the repertory keys.
?
Press the Set key. (For 2nd memory level, also
=
press
:
Press the repertory key under which you want
to save the repertory number.
A number that has already been saved is
shown in the display. If the memory for this
repertory key is empty, z appears in the display
o
Enter the number to be saved (up to 32 digits).
or ...
Saving from the calls list (if service is available)
A
C
...
Press the Down/Up key until the desired
number appears in the display.
or ...
Saving from the redial list:
;
Press the last number redial key.
A
C
...
If necessary, press the Down/Up key until the
desired number appears in the display.
To terminate the process:
?
Press the Set key.
Saving during a call
You can also save phone numbers in the same way during a
call (notebook function).
for
Note:
After the 20th digit, any following digits are moved from right to left
in the display.
Delete all repertory numbers
?1251
Initiate function.
?
Press the Set key.

Adjusting the telephone

Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels and
can also be deactivated completely (default setting: level 4).
To adjust when the telephone is idle:
?5
Initiate function.
H
I
...
Adjust the volume with the Loud/Quiet key.
?
Press the Set key.
To adjust while the telephone is ringing:
.)

Hide quick links:

Advertisement

Table of Contents
loading