EDITION 10/2005
OPERATING MANUAL
6.1
FINISHING WORK AND CLEANING
1. Switch off control unit.
2. Relieve spray gun and system pressure and cut off the atomizing air supply to the
spray gun.
3. Replace material by cleansing agent.
4. Remove tip spanner and briefl y actuate trigger.
5. Relieve spray gun and unit pressure !
6. Clean the body of the gun with solvent which has been recommended by the paint
manufacturer and dry with a cloth or blow gun.
The gun attachment (X) may only be changed by the
WAGNER Service Station.
PART NO. DOC0388891
GM 2800EA
X
31