Table of Contents
Advertisement
Note: The AccuMap Sport must be on in order for the alarms to work. In
other words, if you set the alarm to go off at 7:00 a.m., then the AccuMap
Sport will have to be on at 7:00 a.m., also.
TIMERS
The AccuMap Sport has two timers built in. One is a countdown timer and
the other is a count-up timer. The countdown timer counts down from the
time you put in to zero. The count-up timer
starts at zero and counts up to the time you
entered.
To set either timer, first switch to a screen that
is showing the timer that you want to use. Next,
press the MENU key, then move the black box
to the desired timer set menu. In this example,
we're setting the countdown timer. Now press
the right arrow key. A screen similar to the one
below appears.
Using the right and left arrow keys, move the
black box to the first number in the time that
you want to set. (The time is in hours, minutes,
and seconds) Now press the up or down ar-
row keys until the desired number shows. Con-
tinue until the time shown in the display is cor-
rect, then press the ENT key. In this example,
the down timer is set for 10 minutes. The unit
returns to the navigation, mapping, or windows
display.
To start the timer, press the MENU key, then
move the black box to the "Dn Timer
STOP/
GO" label. Press the right arrow key to start
the timer. The timer continues counting until
you stop it. If you turn the up timer's alarm on
(press the right arrow key when the black box
is on the (Up ALM...Off/On label), it will sound
a tone when it reaches the time you entered in
the up timer set menu. Press the EXIT key to
silence the alarm.
You can reset either alarm to the time you originally set by pressing the
MENU key, then moving the black box to either the "Up Timer Reset" or
"DN Timer Reset" label, then press the right arrow key.
31
Advertisement
Table of Contents
