Table of Contents
Advertisement
IMPORTANT!
If the data shown in digital numbers on any screen is flashing, it means
that data is invalid. DO NOT REL Y ON ANY NUMBERS THAT ARE FLASH-
ING! Usually, this happens when the AccuMap Sport has lost its lock on
the satellites. The data that is flashing was the last known when the unit
lost its navigational capability.
DO NOT NAVIGATE WITH THIS UNIT UNTIL THE DATA STOPS
FLASHING!
POSITION/NAVIGATION DISPLAYS
The AccuMap Sport has navigation, mapping, and windows group modes.
These screens were designed to show data that is used most often. The
digital boxes on Nav 1 and Map 4 screens can be customized to show
data other than the ones chosen by the fac-
tory. See the "Reprogram Boxes" section for
more details.
The three default displays are shown below.
To change displays, simply press the MODE
key. A screen similar to the one at right ap-
pears. Now press the up or down arrow keys
to change modes. (The windows display is
shown as "Groups". For example, Group A is
the first windows group on the MODE menu.)
Press the right arrow key to see more screens on each mode. When the
desired screen appears, press the EXIT key to clear the menu.
Note: For a list of abbreviations used on the displays, see the back of this
manual.
NAVIGATION
MAPPING
WINDOWS
(Nav 1)
(Map 1)
(Group A)
15
Advertisement
Table of Contents
