Table of Contents
Advertisement
USER WAYPOINT OPTIONS
You can customize the way a user waypoint shows
on the AirMap's mapping screens. To do this, first
press the MENU key, then press the up or down
arrow keys until the black box is on the "User WPT
Options" label, then press the right arrow key. The
screen shown at right appears.
You can turn all of the user waypoints on or off
(Waypoints), an icon (Waypoint Symbols), it's name
(Waypoint Names), or it's number (Waypoint Numbers). Press the up or
down arrow keys to move the black box to the desired menu, then press
the right arrow key to turn it on. Press the EXIT key to erase this menu.
ROUTES
You can connect several user waypoints together to form a route. When
you recall the route, the AccuMap Sport will show you navigation informa-
tion to the first waypoint in the route, then when you reach that waypoint,
it switches to the next waypoint, and so on until you reach the last way-
point in the route.
To create a route, first press the MENU key, high-
light the "ROUTES" label, and press the right ar-
row key. The screen shown at right appears. The
"ROUTE PLANNING" label is highlighted. Now
press the right arrow key. The screen shown below
appears.
This unit can store up to twenty different routes.
Route number one shows on this page. If you wish
to create a route using a different number, simply
press the left or right arrow keys until the desired
route number appears. In this example, however,
we'll use route number one.
Beneath the route number is the route name menu. If you wish to name
the route, move the black box to the "NAME" field, then press the right
arrow key. Use the arrow keys to name the route, then press the ENT key
when you're finished.
Now move the black box to the top of the stack of gray boxes at the bottom
39
Advertisement
Table of Contents
