Table of Contents
Advertisement
SERIAL COMMUNICATIONS SETUP
To set the data port, move the black box to the
"Serial Com Setup" on the System Setup menu.
Press the right arrow key. The screen shown at
right appears.
Check your DGPS receiver's manual for the proper
data settings. Move the black box to the menu item
you need to change. Press the left or right arrow
keys to change them. The serial por t defaults are
4800 baud, no parity, and 8 data bits. Press the EXIT key to erase this
menu.
RESET OPTIONS
To return the AccuMap Sport to its original factory settings, press the up
or down arrow keys until the "Preset Options" menu on the System Setup
screen is surrounded by the black box. Now press the right arrow key. A
message appears, asking if you want to restore
the original options. Press the left arrow key if you
do, the right arrow key to quit.
If you restore the unit to the factory settings, all
options such as battery level and delay, contrast,
alarms, and other system choices are returned to
their default values. However, no waypoints, routes,
or icons are erased.
RESET GROUPS
To return all groups to their factory defaults, press the up or down arrow
keys until the black box is on the "PRESET GROUPS" label on the Sys-
tem Setup menu. Finally, press the right arrow key. All windows groups
are now reset to their factory settings, including the digital boxes on the
navigation screens and map #4.
SYSTEM INFO
The system information screen shows the release
date and the version number of the code stored
inside the AccuMap Sport. To view this screen,
press the up or down arrow keys until the "System
Info" menu is surrounded by the black box on the
System Setup menu. Now press the right arrow
key. A screen similar to the one at right appears.
Press the EXIT key when you're finished reading
this screen.
53
Advertisement
Table of Contents
