Table of Contents
Advertisement
of this screen as shown at right. This is the list of
waypoints used in your route. To select the first
waypoint in the route, press the right arrow key. A
new menu appears as shown below.
You can place a waypoint using the waypoint list
or from locations on the map, or both. For the first
waypoint, we'll use the "Insert From WPTS" method.
With the black box on this menu, press the right
arrow key. A screen similar to the one below ap-
pears.
Select Waypoints - Waypoint list
Select the first waypoint either by using the way-
point name or waypoint number menus. As you
move through the list of saved waypoints, their date
and time saved, icon, position, distance and bear-
ing from your present position show at the bottom
of the screen. When the desired waypoint appears
that you want to use as the first waypoint on the
route, move the black box to the "Add WPT To
Route" label, then press the right arrow key. The
unit returns to the route planning screen with this
waypoint placed in the first location on the list as
shown at right.
Select Waypoints - From Map
To add a position from the map to the route's list of waypoints, first move
the black box to the position on the list of waypoints that you want to add
the position. On the example screen on the next page, we simply moved
the black box to the second position on the list. Next, press the right arrow
40
Advertisement
Table of Contents
