Table of Contents
Advertisement
PLOTTER OPTIONS
Plot Trail
The line extending from your present position
is called a plot trail. The AccuMap Sport lets
you customize the plot trail with the following
menu items. All of the items on the Plotter Op-
tions menu affect the plot trail.
Plot Trail Flashing
Since there can be many lines on the map-
ping display, it's helpful at to make the plot trail
flash. This makes it easier to see. To do this,
move the black bar to the "Plot Trail Flashing"
menu, then press the right arrow key. Press
the EXIT key to return to the map. Repeat the
above steps to turn the flashing off. Note: Plot
trail flashing's default is on.
Set Visible Plot Trails
The plot trail can be turned off, if desired. To
turn it off, press the up or down arrow key until
the "Set Visible Plot Trails" menu is surrounded
by the black box. Now press the right arrow
key. The screen at right appears.
Use the up or down arrow keys to select the
desired plot trail, then press the left or right
arrow key. Press the EXIT key to return to the
Plotter Options menu.
Clear Current Plot Trail
To erase the plot trail extending from your present position, move the
black box to the "Clear Current Plot Trail" menu, then press the right arrow
key. A message box appears, asking you if you really want to erase the
plot trail. Follow the directions on this message box. The AccuMap Sport
returns to the mapping screen after the message box clears.
24
Advertisement
Table of Contents
