Clock Alarm; Timers - Eagle Explorer Installation And Operation Instructions Manual

Clock Alarm

You can set the alarm by using the "Clock Alarm"
menu. To set this alarm, press the MENU key
while group "J" is showing, then highlight the "Clk
Alm Set" label. Press the right arrow key. The
screen shown below appears. Using the right and
left arrow keys, move the black box to the first
number in the time that you want to set. Now
press the up or down arrow keys until the de-
sired number shows. Continue until the time
shown in the display is correct, then press the
ENT key. The alarm is now set.
To turn the alarm on, press the MENU key, then
highlight the "CLK ALM" menu. Press the right
arrow key. The alarm is now activated.
When the alarm goes off, a message flashes on
the screen. Press the EXIT key to turn the alarm
off.
Note: The Eagle Explorer must be on in order for
the alarms to work. In other words, if you set the
alarm to go off at 7:00 a.m., then the Eagle Ex-
plorer will have to be on at 7:00 a.m., also.

Timers

The Eagle Explorer has two timers built in. One is a countdown timer and
the other is a count-up timer. The countdown timer counts down from the
time you put in to zero. The count-up timer starts at zero and counts up to
the time you entered.
To set either timer, first switch to a window group
with a timer. Next, press the MENU key, then high-
light the desired timer set menu. In this example,
we're setting the countdown timer. Now press the
right arrow key. A screen similar to the one at
right appears.
Using the right and left arrow keys, move the black
box to the first number in the time that you want
to set. (The time is in hours, minutes, and sec-
onds) Now press the up or down arrow keys until
the desired number shows. Continue until the time
21