Table of Contents
Advertisement
key. Now move the black box to the "Insert From
Map" label and press the right arrow key. The unit
returns to the mapping screen with the cursor on.
(See below.)
Move the cursor (using the arrow keys) until it's on
the exact location that you want to add to the route
list. When it's there, press the ENT key.
As you move the cursor, a line moves with it as
shown in the screen below. This line shows you
the path from the last waypoint on the list. You can
continue to save waypoints on the map by moving
the cursor and pressing the ENT key to save the
location. When you're done, a line connects all the
waypoints on the route, graphically showing you a
diagram of your route. When you're finished sav-
ing locations, press the EXIT key. The unit returns
to the route planning menu. (Note: The screen at
right has been modified to make it easier to see
the route line and cursor.)
The locations you saved for your route from the map have not only been
added to the route list, but have also been added to the waypoint list.
Finishing the Route
When you've selected all of the waypoints for the route, simply press the
EXIT key. Your route is saved in memory.
Following a Route
To follow a route, first recall it by pressing the MENU
key, highlighting the "ROUTES" label, then high-
lighting the "RUN ROUTE" label and press the right
arrow key. The screen shown at right appears.
The black box is on the "Route # 01" label. If this
41
Advertisement
Table of Contents
