Table of Contents
Advertisement
Save Current Plot Trail
You can save up to two plot trails in the AirMap's
memory. It saves these trails even if power is
removed from the unit.
To save your current plot trail, highlight the
"Save Current Plot Trail" menu using the arrow
keys. Now press the right arrow key. The screen
at right appears.
You can save the plot trail as #1 or #2. Move the black box to the desired
plot trail number, then press the right arrow key. A message box appears
asking you if you really want to save the trail. Follow the instructions in this
box. The AccuMap Sport returns to the mapping screen after the mes-
sage box clears. Your plot trail is now stored in memory.
To view your saved plot trail, see the "Set Visible Plot Trails" section.
Set Plotter Update Criteria
The plotter places a dot on your trail as you
move. It determines when to place a dot de-
pending on two things: time and distance. By
default, it places a dot every five seconds or
every .1 of a mile, whichever comes first.
To change the update, highlight the "Set Plot-
ter Update Criteria" menu item, then press the
right arrow key. The screen at right appears.
To limit the update to time only, or distance only,
press the left arrow key until the black box is on the desired setting.
Change the update rate by moving the black box to the "Plot Update Rate"
menu, then press the left or right arrow keys until the desired time ap-
pears.
The distance update is changed in the same manner. Move the black box
to the "Update Distance" menu, then press the left or right arrow keys until
the desired distance appears.
When you have everything on this menu adjusted to the desired settings,
press the EXIT key to enable them.
25
Advertisement
Table of Contents
