Installation Dimension
For installation dimension, see Figure 2-1.
Installation Procedure
You can install this device with expansion screw.
Drill holes in the wall according to hole positions of the bracket.
Put expansion tubes into the holes.
Fix the bracket with self-tapping screws.
After installation, insert SIM card or network cable, connect power supply and turn on
hub switch, to configure and use the hub conveniently in the future. However, H1 model
does not support SIM card.
Put the hub into the bracket from top to bottom.
Error! Use the Home tab to apply 标题 1 to the text that you want to app
2
Installation dimension (unit: mm)
Installation
ear here. 12