Dimension - Dahua H1 Quick Start Manual

Button
Pair
Indicator
Reset
Battery switch
SIM card slot
Power port
Network port

Dimension

For device dimension, see Figure 1-2 and Figure 1-3.
Error! Use the Home tab to apply 标题 1 to the text that you want to app
Table 1-1 Button function description
Description
Pair with alarm devices.
Press to enter wireless pairing mode.
Press and hold for more than 5 seconds to enter AP network pairing
mode.
Indicate the device status.
Blue light on represents normal operation.
Slow flashing blue light represents that it enters AP network pairing
mode.
Fast flashing blue light represents that it enters wireless pairing
mode.
Slow flashing red light represents alarm or network error.
Reset the device to initialized status.
During normal operation, press RESET hole for 6s with a needle. The
indicator will flash red, the device will restore default status.
Turn on or off the standby battery.
Turn on this switch, the standby battery of the device will automatically
charge when the device is connected to power supply, so the device
continues to work normally after power failure.
With SIM card slot, the device goes online.
Basic version H1 does not have SIM card slot.
5V power port.
Connect wired network.
Device dimension (1) (unit: mm)
ear here. 10