Gold Medal 5550 Instruction Manual

Gold Medal 5550 Instruction Manual

Holding cabinets

Advertisement

Quick Links

Part No. 42687
Revised March 2003
HOLDING CABINETS
Instruction Manual
Model #5550 AND #5551

Advertisement

Table of Contents
loading

Summary of Contents for Gold Medal 5550

  • Page 1 Part No. 42687 Revised March 2003 HOLDING CABINETS Instruction Manual Model #5550 AND #5551...
  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS...
  • Page 3: Installation

    Holding Cabinets FORWARD This manual covers the all models #5550 and #5551 product holding cabinets. You can be very proud of your 5550 or 5551 Holding Cabinet. In addition to being an attractive "eye catcher", it contains various engineering innovations which make it the leader in the industry. The exterior of the machine is designed and built-up to present an attractive appearance for many years.
  • Page 4: Controls And Their Functions

    The stainless steel body of the Warmer is easy to keep clean. Usually a damp cloth will remove all dirt and grease spots. NEVER USE ABRASIVES on the stainless steel body. The glass should always be clean and sparkling. Remember the inside of the glass must be cleaned too. All Models #5550 and #5551...
  • Page 5: Maintenance Instructions

    Holding Cabinets MAINTENANCE INSTRUCTIONS All Models #5550 and #5551...
  • Page 6 Holding Cabinets ORDERING SPARE PARTS Always speak to a Gold Medal Products Technical Service Advisor before ordering any parts to help ensure accuracy for your product. Include diagrams may not be the latest information. 1. Identify the needed part by checking it against the photos, illustrations, and/or parts list.
  • Page 7 Side Glass Channel 42652 42652 42652 Top Glass Channel 42655 42655 42655 Front Label 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34) 43208 43208 43208 Theromstat 42006 42006 42006 Terminal Block * Not Shown All Models #5550 and #5551...
  • Page 8 Side Glass Channel 42652 42652 42652 Top Glass Channel 42782 42782 42782 Front Label 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34) 43208 43208 43208 Thermostat 42006 42006 42006 Terminal Block * Not Shown All Models #5550 and #5551...
  • Page 9 Side Glass Channel 42652 42652 42652 Top Glass Channel 42655 42655 42655 Front Label 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34) 43208 43208 43208 Thermostat 42006 42006 42006 Terminal Block * Not Shown All Models #5550 and #5551...
  • Page 10 Side Glass Channel 42652 42652 42652 Top Glass Channel 42782 42782 42782 Front Label 74142 74142 74142 #8-32 X 1/4 Pan HD PH (34) 43208 43208 43208 Thermostat 42006 42006 42006 Terminal Block * Not Shown All Models #5550 and #5551...
  • Page 11: Cabinet Assembly

    Holding Cabinets CABINET ASSEMBLY All Models #5550 and #5551...
  • Page 12 Holding Cabinets BOTTOM INSIDE ASSEMBLY All Models #5550 and #5551...
  • Page 13 Holding Cabinets TOP INSIDE ASSEMBLY All Models #5550 and #5551...
  • Page 14: Electrical Schematic

    Holding Cabinets ELECTRICAL SCHEMATIC UPPER CONTROL CABINET WIRING IS #16 AWG CSA LISTED, 600VOLT – 105C U.L. RECOGNIZED. LOWER CONTROL CABINET WIRING IS #16AWG CSA LISTED, 450C UL RECONGIZED. Double Door Only All Models #5550 and #5551...
  • Page 15 Holding Cabinets ELECTRICAL SCHEMATIC UPPER CONTROL CABINET WIRING IS #16 AWG CSA LISTED, 600VOLT – 105C U.L. RECOGNIZED. LOWER CONTROL CABINET WIRING IS #16AWG CSA LISTED, 450C UL RECONGIZED. All Models #5550 and #5551...
  • Page 16: Warranty

    WARRANTY WE WARRANT to the original purchaser the Gold Medal equipment sold by us to be free from defects in material or workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or replacement of any...

This manual is also suitable for:

5551

Table of Contents