Table of Contents
Advertisement
1-3. Main Functions of the W Type(Wire) Link System
3. The Remote Programming Function
You can create programs and assign system registers for a remote FP3/FP5 from any other FP3/FP5 in the same
network. With this function, programs can easily be modified in the field, even when the Programmable Controller
built inside of process controller.
Notes :
• This function can be performed by any of all the stations(Max. 32) in the same network.
• This function is available for all of the W Type(Wire) Link Units installed in a single CPU.
If other P/W Link units are installed together in a single CPU, the total number of P/W Link units
must not exceed 3 units.
The P/W Link units are : P Type(Optical) Link Unit, W Type(Wire) Link Unit,
• Refer to page 44, "Remote Programming" for details about the Remote Programming function.
6
C.C.U.(Computer Communication Unit), C-NET Link Unit.
Station 01
Monitoring
X0
R0
TMX 123
Station 02
Y20
0
Advertisement
Table of Contents
