Table of Contents
Advertisement
4-4. Remote Programming
Using the NPST-GR Programming Support Tool
The tools to be prepared ; NPST-GR Software
1.Connect the RS422 port on the CPU to the RS422 port on the RS422/232C Adapter with the FP Peripheral
Cable. Then, connect the RS232C port on the RS422/232C Adapter to RS232C port on your computer using an
RS232C cable.
Note :
• Be sure to check the NPST configuration using the "Esc" menu.
2.Select "SPECIFY LINK UNIT" from the "MENU"("Ctrl" + "f10") in "ONLIN mode.
3.Select the LINK number and station number (UNIT NO) in the specified range.
4.Perform programming to the Programmable Controller specified by the above procedure.
46
:AFP266538
FP Peripheral Cable
:AFP5520(0.5m) or AFP5523(3m)
RS422/232C Adapter :AFP8550
RS232C Cable
: Refer to the page 91.
Computer
: IBM PC-AT 100 % compatible
MS-DOS(PC-DOS) Ver.3.3 or later
Advertisement
Table of Contents
