Enabling PC Link Mode
PC Link Mode is enabled with Mode Selector Switch 1(MODE SW. 1) on the front panel of the W Type(Wire)
Link Unit.
MODE SW. 1
1
OFF : PC Link Mode enabled
1
ON : PC Link Mode disabled
Notes :
• The Mode Selector Switch number(MODE SW.) 1 is set to OFF(PC Link Mode) when shipped.
• Before you set the Mode Selector Switches(MODE SW.), turn OFF the power.
The unit's modes are activated when the power is turned ON.
Even if you change the mode while the power is ON, the new mode will not be functional. You
must turn OFF the power once and then turn it ON again after you have changed the modes.
• When the unit is set for "PC Link Mode", the "PC LINK LED" will be turned ON.
• PC LINK LED turns ON when the Mode Selector Swithch 1 (MODE SW. 1)
is set to OFF(PC Link Mode enabled).
4-1.W Type(Wire) Link Functions
25