P/W Pc Link Function Not Available Flowchart - Panasonic FP3 Technical Manual

2)P/W PC Link Function Not Available Flowchart

There si a unit whose
P/W PC Link function
is not available.
First, check the source unit whose
data cannot be transferred.
Is the unit set in PC Link Mode?
YES
Is the allocation
of the PC Link Area performed
properly?
YES
Is there any PC
Link send area overlap?
(Is the ERROR 2
LED ON?)
NO
Is there any station
number(UNIT NO.) overlap?
(Is the ERROR 2
LED ON?)
NO
Is the station number
(UNIT NO.) in the range
of 01 to 16?
Does a
communication error occur?
(Is the ERROR 2
LED ON?)
Then, check the destination unit.
Is the allocation of the PC Link
Area perfermed prorperly?
Does a communication error occur?
(Is the ERROR 2 LED ON?)
Please contact us
NO
NO
YES
YES
NO
YES
YES
NO
NO
YES
YES
NO
Set the Mode Selector Switch 1(MODE SW. 1) to OFF and
turn OFF the power . Then, apply the power again.
Allocate the PC Link Area and start again.
Go to the "PC Link Send Area Overlap Flowchart".
Go to the "Station Number(UNIT NO.) Overlap Flowchart".
Set the station number(UNIT NO.) in the range (01 to 16)
so that there is no overlap.
Go to the "Communication Error Flowchart".
Allocate the PC Link Area and start again.
Go to the "Communication Error Flowchart".
5-2. Error Flowchart
59