Njoy Balder Series User Manual page 16

Step 5. After replacing the Step 6. Re-connect the battery
batteries, put the battery box wires and put the front panel
back to original location and back to the unit.
screw it tightly.
30
6.1 Battery kit assemly procedure
Balder 1000 / 1500
Step 1. Remove adhesive tapes.
Tapes
Tapes
Step 3. Put assembled battery
packs on one side of plastic
shells.
Step 2. Connect all battery
terminals by following below
chart.
Step 4. Cover the other side of
plastic shell as in the below
picture.
31