Support Introduction This quick start guide assists the user to connect and use the YROTATE-IT-RX62T motor control kit for the first time. The RX62T microcontroller flash memory is pre-programmed with a motor control project. Please check the contents of the kit using the supplied package contents list and notify your supplier if any are missing.
Quick Start Guide: YROTATE-IT-RX62T Initial Board Configuration Before connecting the USB cable to the host PC and to the YROTATE-IT-RX62T board please follow the setup procedure as described below. 1. The demonstration BLDC motor comes pre-wired with its connector as shown below.
Quick Start Guide: YROTATE-IT-RX62T PC Graphical User Interface (GUI) Software Installation Before starting the GUI Installation please ensure the host PC has Flash Player and Microsoft .NET framework loaded. Insert the Software CD into your computer’s CD-ROM drive. The CD should start the installation automatically.
3. The host PC will detect the new hardware and start the driver installation. Follow the Windows instructions, selecting <NOT THIS TIME> to the request for an automatic driver search by Windows. Then click on <SELECT A PATH> to select the appropriate YROTATE-IT-RX62T drivers on the CD-ROM in the folder called “Drivers”.
Page 5
Quick Start Guide: YROTATE-IT-RX62T Once the GUI is open use the following procedure to connect the GUI to the YROTATE-IT-RX62T board. • Select the “Select board setup” drop down menu bar in the “Communication Settings” box in the top left hand corner of the GUI panel.
Drivers and setup files for the PC Graphical User Interface YROTATE-IT-RX62T Drivers YROTATE-IT-RX220 Drivers Embedded Software HEW Project Source Code Source files for code flashed by default into the Renesas microcontroller IEC60730 Self Test MCU software Manuals Motor Specifications Relevant documentation for the kit, the motor and the MCU...