Mirroring; Mirror Mode; Mirror Setting; Show Mirror - ASUSTeK COMPUTER GigaX3112 Series User Manual

5.3.13 Mirroring

5.3.13.1 mirror mode

To set port mirror mode.
CLI Syntax: mirror mode
Example: (config)# mirror mode l2

5.3.13.2 mirror setting

This command mirrors the source interface list traffic to the destination interface.
The mirror type support received traffic, Transmitted traffic, or both.
CLI Syntax: mirror IFLIST to IFNAME (rx|tx|both)
Example: (config)# mirror gi1/0/3-5 to gi1/0/9 both

5.3.13.3 show mirror

To show current mirror features.
CLI Syntax: Show mirror
Example: ASUS# show mirror

5.3.13.4 no mirror

This command resets the source interfacesʼ received or transmitted traffic or
both the destination interface.
CLI Syntax: no mirror SRCIFLIST (rx|tx|both)
Example: (config)# no mirror gi1/0/1,gi1/0/4 rx

5.3.14 Static Multicast

5.3.14.1 mac-address-table multicast

Use the ac-address-table multicast configuration command on the switch to add
multicast static addresses to the MAC address table.
CLI Syntax: mac-address-table multicast MACADDR vlan VLANID interface
IFLIST
Example: (config)# mac-address-table multicast 0100.5e11.1111 vlan 2
interface gi1/0/3 1
GigaX3112 Series Layer 3 Managed Switch
77