Replacing Defective Fans - ASUSTeK COMPUTER GigaX3112 Series User Manual

Layer 3 managed switch
Table of Contents

Advertisement

GigaX3112 Series Layer 3 Managed Switch
There may be several addresses associated with an Internet name. This is
common for web sites that receive heavy traffic; they use multiple, redundant
servers to carry the same information.
To exit from the nslookup utility, type exit and press <Enter> at the command
prompt.

7.2 Replacing defective fans

Note
When any one of the switch fans (located on the rear panel) becomes defective,
you can easily replace it following these steps.
Unlock the fan module by loosening the thumbscrew that secures it to the rear panel.
Carefully pull the module out as shown.
Carefully pull the two power cables from the fan connectors.
Loosen the screws that secure the fan to the module. Remove the defective fan.
94
Turn off the power of the switch when you remove the fan
module on the rear side of the switch.
Figure 75. Loosening the thumbscrew
Figure 76. Removing the fan module

Advertisement

Table of Contents
loading

Table of Contents