Login And Logout - ASUSTeK COMPUTER GigaX3112 Series User Manual

Command Parameters
bdinfo none
echo string
ethaddr none
gatewayip IP address
go none
? or help none
imls none
ipaddr IP address
loadbx none
netmask mask
ping host
pwd none
reset none
serverip IP address
slot slot
tftpboot filename
version none
5.2

Login and logout

To enter the CLI mode, you have to give a valid user name and password. As
the first time login, you can enter "admin" as the user name (without password).
For security reason, please change the user name and password after login.
Once you forget the use name and password, you may contact ASUS support
team or restore the default user account in the Boot ROM Command mode –
"pwd". If you take the second choice, the default user "admin" will be restored.
You type "exit" to leave the CLI mode safely. This action allows you to secure the
CLI mode. The next user has to do login again with authorized user name and
password.
GigaX3112 Series Layer 3 Managed Switch
Usage
none
none
none
xxx.xxx.xxx.xxx
none
none
none
xxx.xxx.xxx.xxx
none
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
none
none
xxx.xxx.xxx.xxx
1, 2, auto
Example:
3112single.img
none
Notes
print Board Info structure
echo the string to console
get MAC address
set gateway IP address
boot firmware image
print online help
list all images found in flash
set tftp client IP address
load binary file over
serial line (X modem)
set network mask
send ICMP ECHO_REQUEST
to network host
reset switch password
perform reset of the CPU
set tftp server IP address
select boot slot to boot
load image via network
using TFTP protocol
print monitor version
65