System Management Configuration; Firmware Upgrade; Configure Terminal; Enable - ASUSTeK COMPUTER GigaX3112 Series User Manual

5.3.3 System Management Configuration
5.3.3.1

Firmware upgrade

Upgrading new firmware into switch.
CLI Syntax: archive download-sw /overwrite tftp: ImageFile
Example: ASUS# archive download-sw /overwrite tftp:192.168.1.3/
3112single.img
Note: We strongly recommend you to backup "startup-config"
before upgrading.
Note
5.3.3.2 configure terminal
Use the write configuration command on the switch to configuration.
CLI Syntax: configure terminal
Example: ASUS# configure terminal
5.3.3.3

enable

Entering enable mode and turn on privileged mode command.
CLI Syntax: enable
Example: ASUS# enable
5.3.3.4

disable

Turning off privileged mode and back to user mode.
CLI Syntax: disable
Example: ASUS# disable
5.3.3.5

end

This command let user end current mode and down to enable mode.
CLI Syntax: end
Example: ASUS# end
5.3.3.6

exit

This command let user exit current mode and down to previous mode.
CLI Syntax: exit
Example: ASUS# exit
GigaX3112 Series Layer 3 Managed Switch
67