Write Memory; Assign A New User Account; Delete A New User Account; Physical Interface Commands - ASUSTeK COMPUTER GigaX3112 Series User Manual

GigaX3112 Series Layer 3 Managed Switch

5.3.3.16 write memory

Use the write file configuration command on the switch stack or standalone
switch to write configuration to the file.
CLI Syntax: write memory
Example: ASUS# write memory

5.3.3.17 Assign a new user account

Add a user, which is named tony and its password is tony123456
CLI Syntax: add user WORD WORD
Example: add user tony tony123456

5.3.3.18 Delete a new user account

Delete a user account, which is named tony.
CLI Syntax: delete user WORD
Example: delete user tony

5.3.4 Physical interface commands

5.3.4.1

Interface mode

Use the auto-negotiation configuration command on the switch to set auto-
negotiation status of the port.
CLI Syntax: auto-negotiation
Example: (config)# interface gi1/0/2
This example shows how to use the auto-negotiation configuration command on
the switch to enable auto-negotiation mode.
5.3.4.2

Interface duplex

Use the duplex configuration command on the switch to set duplex status of the
port.
CLI Syntax: duplex (full| half)
Example: (config)# interface gi1/0/2
This example shows how to use the duplex configuration command on the
switch to set full-duplex on the interface.
70
(config-if)# auto-negotiation
(config-if)# duplex full