Reboot; Firmware Upgrade - ASUSTeK COMPUTER GigaX3112 Series User Manual

4.3.3 Reboot

The Reboot page contains a Reboot button. Clicking the button reboots the system.
Rebooting the system stops the network traffic and terminates
the Web interface connection.
Warning

4.3.4 Firmware upgrade

The Firmware page contains the following information:
Hardware Version: shows the hardware revision number.
Boot ROM Version: shows the version of the boot code
Firmware Version: shows the current running firmware version. This
number will be updated after the firmware update.
Enter the TFTP server IP address and firmware file name. Click Upgrade to
update the switch firmware. See Figure 17 for reference. For example,
TFTP Server: 192.168.1.155
File Name: 3112Single-v10.img
Clicking the upload button loads the assigned firmware to the
switch, then reboot system after a successful firmware update.
You have to re-login to web interface again.
Warning
If the upgrade is performed under bootrom mode, Start-Up
configuration file will be lost.
We strongly recommend you to backup "startup-config" before
upgrading.
GigaX3112 Series Layer 3 Managed Switch
Figure 16. IP Setup page
19