Dvmrp - ASUSTeK COMPUTER GigaX3112 Series User Manual

When setting IGMP, select the corresponding interface to configure parameters
then click on the Modify button. The field you changed will update the content
in the display window. To save any changes and make it effective immediately,
click OK. Use Reload to refresh the setting.
4.6.5.2

DVMRP

This function is used to configure DVMRP.
Network DVMRP is: Enable or disable DVMRP for specific network.
Select the corresponding "Network Address" to configure parameters then click
on the Modify button. The field you changed will update the content in the
display window. To save any changes and make it effective immediately, click
OK. Use Reload to refresh the setting.
Before enabling, "IP Multicast Route Mode" in M-Route page
must choice "DVMRP".
Note
GigaX3112 Series Layer 3 Managed Switch
Figure 46. M-Route Configuration
Figure 47. DVMRP Configuration
43