GigaX3112 Series Layer 3 Managed Switch
4.9.3 RADIUS
In order to use external RADIUS server, the following parameters are required to
be setup:
Authentication Server IP: The IP address of the RADIUS server.
Authentication Server Port: The port number for the RADIUS server is
listening to.
Authentication Server Key: The key is used for communications between
GigaX and the RADIUS server.
Confirm Authentication Key: Re-type the key entered above.
Note
Click OK to make the settings permanent. Click Reload to refresh the settings to
current value.
56
Figure 61. Dial-In user
The VLAN of the RADIUS server connected to the switch must
be the same as the VLAN of the system management interface.