Router-Id; Area; Multicast Route; Vrrp - ASUSTeK COMPUTER GigaX3112 Series User Manual

GigaX3112 Series Layer 3 Managed Switch
5.3.7.2

router-id

Assigning an OSPF router-id in IP address format.
CLI Syntax: ospf router-id a.b.c.d
Example: (config-router)# ospf router-id 10.0.0.3
5.3.7.3

area

Set the OSPF area ID.
CLI Syntax: network a.b.c.d/m area a.b.c.d
Example: (config-router)# network 102.192.2/24 area 192.192.2.254

5.3.8 Multicast Route

Enable or disable the function of multicast route which include DVMRP and PIM-DM.
CLI Syntax: ip multicast-routing ROUTING-PROTOCOL
Example: (config-router)# ip multicast-routing PIM-DM

5.3.9 VRRP

Enable or disable the function of VRRP for specific IP interface
CLI Syntax: standby VRID (1-255) ip a.b.c.d/m
Example: (config-if)# standby 1 ip 192.168.1.1/24

5.3.10 Spanning Tree

5.3.10.1 clear spanning-tree counters

Use the clear spanning-tree counters configuration command on the switch to
clear spanning-tree statistics.
CLI Syntax: clear spanning-tree counters
Example: ASUS# clear spanning-tree counters

5.3.10.2 clear spanning-tree counters interface IFNAME

Use the clear spanning-tree counters configuration command on the switch to
clear spanning-tree statistics on one interface.
CLI Syntax: clear spanning-tree counters interface IFNAME
Example: ASUS# clear spanning-tree counters interface gi1/0/2
74